MSX  MSX-C

  One-piece metallic spring coupling

  Extremely high torsional stiffness, low inertia and excellent response

  Manufactured from extra super duralumin - the highest strength aluminum alloy

  Zero backlash

  Absorption of parallel, angular misalignments and shaft end-play by spring action

  Identical clockwise and anticlockwise rotational characteristics

  Maintenance-free, oil and chemical resistant

  Finished bore product-Models featuring two different end bores also in stock

MST  MST-C  MST-K

  One-piece metallic spring coupling

  Zero backlash

  Absorption of parallel, angular misalignments and shaft end-play by spring action

  High torsional stiffness and response

  Identical clockwise and anti-clockwise rotational characteristics

  Maintenance-free, oil and chemical resistant

  Available in aluminum alloy and stainless steel

  Outside diameter ranging from O8 to O63 - Wide variation

  Finished bore product-Models featuring two different end bores also in stock

MWS  MWS-C

  One-piece metallic spring coupling

  Zero backlash

  Absorption of angular misalignment and shaft end-play by spring action

  Parallel misalignment is not absorbed

  High torsional stiffness and response

  Identical clockwise and anticlockwise rotational characteristics

  Maintenance free and excellent resistance to oil and chemicals

  Available in aluminum alloy and stainless steel

  Finished bore product-Models featuring two different end bores also in stock

MDW

  Disk type flexible coupling

  High torque capacity, torsional stiffness and excellent response

  Zero backlash

  Double stainless steel disks absorb parallel, angular misalignments and shaft end-play

  Identical clockwise and anticlockwise rotational characteristics

  Maintenance free and excellent resistance to oil and chemicals

  Finished bore product-Models featuring two different end bores also in stock

MDS

MHW

  Disk type flexible coupling

  High torque capacity, torsional stiffness and excellent response Zero backlash

  Stainless steel disks absorb parallel, angular misalignments and shaft end-play

  Identical clockwise and anticlockwise rotational characteristics

  Maintenance free and excellent resistance to oil and chemicals

  Finished bore product-Models featuring two different end bores also in stock

MHS

  Disk type flexible coupling

  High torque capacity, torsional stiffness and excellent response Zero backlash

  Stainless steel disks absorb angular misalignments and shaft end-play

  Parallel misalignment is not absorbed

  Identical clockwise and anticlockwise rotational characteristics

  Maintenance free and excellent resistance to oil and chemicals

  Finished bore product-Models featuring two different end bores also in stock

MTD

  Disk type flexible coupling

  High torsional stiffness, light weight and excellent response Zero backlash

  Identical clockwise and anticlockwise rotational characteristics

  Stainless steel disks absorb parallel, angular misalignments and shaft end-play

  Finished bore product-Models featuring two different end bores also in stock

MFB  MFB-C

  Bellows type flexible coupling

  Zero backlash

  High torsional stiffness and response

  Spring action bellows configuration absorbs parallel, angular misalignments
  and shaft end-play

  Constant velocity even under misalignment

  Identical clockwise and anticlockwise rotational characteristics

  Maintenance free and excellent resistance to oil and chemicals

  Bellows available in stainless steel or phosphor bronze (hub : aluminum alloy)

  Finished bore product-Models featuring two different end bores also in stock

MKM-C  MKM-AC

  Bellows type flexible coupling for high torque applications

  Zero backlash

  High torsional stiffness, low inertia and excellent response

  Spring action bellows configuration absorbs parallel, angular misalignments
  and shaft end-play

  Constant velocity even under misalignment

  Identical clockwise and anticlockwise rotational characteristics

  Maintenance free and excellent resistance to oil and chemicals

  Operational temperature : ?20°C~300°C

  Finished bore product-Models featuring two different end bores also in stock

  Can be applied to tapered shafts of servomotors

MWBS

-  High precision welded bellows ? All stainless steel body

-  Super flexibility

-  Zero backlash

-  Low inertia and excellent response

-  Constant velocity even under misalignment

-  Identical clockwise and anticlockwise rotational characteristics

-  Maintenance free

-  Ideal for use in systems requiring a high degree of precision and reliability, such as

   measurement, control, information processing, and communication equipment

MOL  MOL-C

-  Oldham type flexible coupling

-  Slippage between hubs and spacer allows high parallel and

-  angular misalignments

-  Minimized load derived from misalignments on shafts

-  High torsional stiffness and response

-  Simple configuration enables ease of assembly

-  Excellent resistance to oil and electrical insulation

-  Operational temperature : ?20°C~80°C

-  Finished bore product-Models featuring two different end bores

-  also in stock

MOS

-  Oldham type flexible coupling

-  Compact coupling with short overall length

-  Slippage between hubs and spacer allows high parallel and angular misalignments

-  Minimized load derived from misalignments on shafts

-  High torsional stiffness and response

-  Simple configuration enables ease of assembly

-  Excellent resistance to oil and electrical insulation

-  Operational temperature : ?20°C~80°C

-  Finished bore product-Models featuring two different end bores also in stock

MCT  MCT-C

-  High torsional stiffness and excellent response

-  Slippage between bushes and pins allows high parallel and angular misalignments

-  Almost zero backlash achieved by precise fit of pins and bushes

-  Minimized load derived from misalignments on shafts

-  Identical clockwise and anticlockwise rotational characteristics

-  Maintenance free, excellent resistance to oil and chemicals

-  Finished bore product-Models featuring two different end bores also in stock

MJT  MJT-C  MJT-K  MJT-CK

-  Compression type coupling assembled by pressing a polyurethane

-  sleeve into hubs on both sides

-  Zero backlash in low torque application

-  Can be used as a flexible coupling in high torque application

-  Excellent flexibility-Torsional vibration can be absorbed as well as

-  parallel and angular misalignments

-  Three different hardness sleeves are available

-  Resistance to oil, and electrical insulation

-  Identical clockwise and anticlockwise rotational characteristics

-  Operational temperatures: ?20°C~60°C

-  Finished bore product-Models featuring two different end bores also in stock

MSF

-  Simply structured serration type coupling, transmitting

-  torque by casing-sleeve engagement

-  Excellent flexibility, high values in parallel and angular misalignments,

-  absorption of torsional vibration

-  Almost zero backlash achieved by precise fitness of serration

-  Easy attachment on shafts by setscrews

-  Resistance to oil, and electrical insulation

-  Finished bore product-Models featuring two different end bores also in stock

-  Available with Hytrel sleeves as well as polyurethane sleeves for the applications -  requiring high torque and temperatures

MRG  MRG-C  MRG-W

-  Light weight, extremely low inertia and high response

-  Maintenance free and excellent resistance to oil and chemicals

-  Available in aluminum alloy and stainless steel

-  Setscrew type, clamp type and split type are available

-  Finished bore product-Models featuring two different end bores also in stock

MLR-C  MLR-V

-  Long type rigid coupling

-  Can be used as a joint to connect with shafts

-  Available in aluminum alloy and stainless steel

-  Clamp type and split type are available

-  Finished bore product

MDR

-  Reduces vibration in resonance area of stepping motors

-  Assists to follow pulse speed in the range of high rotational

-  speed and enhance maximum rotational speed of stepping motors

-  Operational temperature : ?10°C~40°C

-  Finished bore product

FLEXUS

-  Multifunctional parts made in a variety of materials and featuring spring action

-  Each type has a simple slit type construction The same exceptional performance   proven by the miniature flexible couplings (MST & MSX)

- Spring performance can be customized for compression, pull, sheering, and bending

-  Extremely high torsional stiffness

-  Due to the cutting process, exact spring constants can be

   obtained for use in instruments where precision and reliability  are required

-  Almost linear graphed spring performance can be achieved

-  Heat radiating effect can minimize shrinkage and expansion  due to heat

-  Nearly any shape or dimension is possible Not only cylinders but also polygonal    shaped Flexus® can be produced

-  The shape of the hub can be customized according to use

-  Can be selected in a variety of materials: aluminum alloy, stainless steel, copper     beryllium alloy, spring steel, engineering plastic etc.

MPF

-  Photo sensor flange for detection of original position

-  Light weight and low inertia

-  Finished bore product - Shaft bore diameter : O4~O15

-  Custom-made products are available in outer diameter,

-  width of slit, bore diameter, material, surface treatment, etc.